network cards
49 elements in this category
Add an NEW hardware
Return to categories list
3COM :
| submited by pollux | 3COM 3C905 |
|---|
| have been tested on the version 3.1 : works perfectly |
| RAS |
| submited by blombo | 3COM FE575C (pcmcia) |
|---|
| have been tested on the version 3.1 : works perfectly |
| aucun problème |
| submited by Michel Bouissou | 3COM Etherlink III 3C589C carte PCMCIA |
|---|
| have been tested on the version 3.2-MiB : works perfectly |
| Autodétectée et configurée sans aucun problème |
| submited by Bruno H | 3COM 3c509 |
|---|
| have been tested on the version 3.3 : works perfectly |
| Il faut faire un 'modprobe 3c509' pour cet ancien modèle de carte réseau sur bus ISA |
ALLIED TELESYS :| submited by talstog | ALLIED TELESYS AT 2500 TX PCI |
|---|
| have been tested on the version 3.1 : works perfectly |
| it detected the DHCP server |
BELKIN :| submited by plpm | BELKIN F5D6020 |
|---|
| have been tested on the version 3.2 : works perfectly |
| It's a Prism II. It recognizes it perfectly. Wavemon runs ok, but not airsnort (unable to set monitor mode). |
| submited by ericjt | BELKIN F5D6020 V2 PCMCIA wifi |
|---|
| have been tested on the version 3.6 : need a manipulation by the user |
| Fonctionne lorsqu' elle est branchée à chaud.Mais pas qd elle est dans le PC au démarrage.Chipset Atmel.Knoppix sur HD |
CISCO :| submited by Avuton | CISCO Aironet350 |
|---|
| have been tested on the version 3.2 : works perfectly |
| Reconnaissance automatique dès l'insertion de la carte, il n'y a plus qu'à configurer les parmaètres du réseau wi-fi |
| Link to a documentation describes the manipulation : http://www.magery.org/linux/knoppix.html |
D-LINK :| submited by Yakko | D-LINK DFE-530TX |
|---|
| have been tested on the version 3.1 : works perfectly |
| RAS |
| submited by gjai | D-LINK de660ct+ |
|---|
| have been tested on the version 3.1 : works perfectly |
| aucun pb |
| submited by Xavier | D-LINK DFE-538tx |
|---|
| have been tested on the version Knoppinx 3.1 : works perfectly |
| A1 |
| submited by papaico | D-LINK DFE-670TXD (PCMCIA) |
|---|
| have been tested on the version 3.2 MIB1.1 : works perfectly |
| Trop cool la vie (vive le test du ping de broadcast) |
| submited by Fred | D-LINK DFE-528TX |
|---|
| have been tested on the version 3.3 : works perfectly |
| Reconnu sans aucune manipulation particulière |
DEC :| submited by TFFLAN | DEC 21040 (pci) |
|---|
| have been tested on the version 3.1 : works perfectly |
| Reconnue parfaitement. |
HP :| submited by giltonic | HP Broadcom NetXtrem gigabit Ethernet for HP |
|---|
| have been tested on the version 3.3 : don't works actually |
| Ne fonctionne pas |
INTEL :| submited by Winter | INTEL Pro 100B Lan |
|---|
| have been tested on the version 3.1 : works perfectly |
| no problem |
| submited by Vincent | INTEL E7205 |
|---|
| have been tested on the version 3.4 C'T : works perfectly |
| Carte reseau 1Gb intégrée à la carte mère GA8-INXP de Gigabyte. Fonctionne immédiatement! |
LINKSYS :| submited by abcde | LINKSYS LNE100TX |
|---|
| have been tested on the version 3.1 : works perfectly |
| tulip driver used |
| submited by Picodor | LINKSYS DFE-528TX |
|---|
| have been tested on the version 3.1 : works perfectly |
| Supporte un câble modem Motorola SB4200. Aucune configuration à effectuer pour la connexion Internet. |
| submited by François Ropert | LINKSYS WPC11 |
|---|
| have been tested on the version 3.3 : works perfectly |
| Auto-détecté sans problèmes. |
| submited by superna | LINKSYS WPC54G |
|---|
| have been tested on the version 3.6 : need a manipulation by the user |
| Il faut utiliser ndiswrapper avec les drivers pour windows, fair 'modprobe ndiswrapper'
'ndiwrapper -i /chemin/vers/le/inf/du/driver'
'loadndisdriver nom_du_inf_sans_.inf'
puis normalement une connection wlan0 appararais, config avec iwconfig, iwpriv, ... |
NETGEAR :| submited by gpa4 | NETGEAR FA321TX |
|---|
| have been tested on the version 3.1 (12122002) : works perfectly |
| Reconnu du premier coup et fonctionne parfaitement au bot (100Mbps) |
| submited by cosmicflo | NETGEAR FA410tx PCMCIA |
|---|
| have been tested on the version 3.1 : works perfectly |
| no problem |
| submited by poussin | NETGEAR MA401 |
|---|
| have been tested on the version 3.2 : works perfectly |
| Fonctionne Nickel |
| submited by club116 | NETGEAR FA511 pcmcia |
|---|
| have been tested on the version 3.2 : works perfectly |
| Aucun problème |
| submited by yan78 | NETGEAR FA310 |
|---|
| have been tested on the version 3.2 : works perfectly |
| RAS |
| submited by dmorlet | NETGEAR MA111 USB |
|---|
| have been tested on the version 3.4 : works perfectly |
| reconnue dynamiquement en live-CD mais nécessite en root la commande /etc/init.d/wlan restart |
NVIDIA :| submited by Rafael | NVIDIA nForce MCP Networking Controller |
|---|
| have been tested on the version 3.3 2003-11-14 : need a manipulation by the user |
| Les drivers sur le site nvidia doivent être installé. |
| Link to a documentation describes the manipulation : http://www.nvidia.com/object/linux_nforce_1.0-0261 |
| submited by Frédéric MILONAS | NVIDIA NVidia Nforce MCP Networking Controler |
|---|
| have been tested on the version V3.3 : works perfectly |
| Fonctionne parfaitement sans manipulations sur la V3.3 2004-02-16 |
OTHER :| submited by David DEMONCHY | OTHER SITECOM CARDBUS |
|---|
| have been tested on the version 3.1/20-01-2003 : works perfectly |
| CARDBUS PC CARD FAST ETHERNET 10/100MBPS |
| submited by Michel Bouissou | OTHER TRENDnet PCMCIA TE100-PCBUSR 10/100MBps 32-Bit CardBus |
|---|
| have been tested on the version 3.2-MiB-10 : works perfectly |
| Impeccable |
| submited by panda | OTHER ZyAIR B320 (chipset BC;4301) |
|---|
| have been tested on the version Kaella : don't works actually |
| Aucun driver n'existe actuellement pour cette carte et son chipset |
PSION :| submited by Alexis ROBERT | PSION Gold Card 10/100 Ethernet |
|---|
| have been tested on the version 3.1 2003-01-20 : works perfectly |
| Attention, c'est une carte PCMCIA ! |
REALTEK :| submited by cosmicflo | REALTEK RTL8139 PCI |
|---|
| have been tested on the version 3.1 : works perfectly |
| nickel. |
| submited by drwx | REALTEK 8029 |
|---|
| have been tested on the version 3.1 : works perfectly |
| Fonctionne parfaitement en connexion ADSL Ethernet. |
| submited by Michel Bouissou | REALTEK RTL 8139 PCI |
|---|
| have been tested on the version 3.2-MiB-10 : works perfectly |
| Est parfaitement détectée et auti-configurée sur cette version de Knoppix. |
| submited by mario morissette | REALTEK Fast Ethernet PCI Realtek RTL8139Family |
|---|
| have been tested on the version 3.2 : works perfectly |
| parfait , aucune manipulation |
| submited by KLAOUN | REALTEK 8139 PCI INTEGRE |
|---|
| have been tested on the version 3.3-2003-11-19 : works mostly |
| PAS DE PROBLEME |
| submited by jrhgg | REALTEK 8139 / 810x family |
|---|
| have been tested on the version 3.3 : works perfectly |
| Reconnue parfaitement (ideal avec ma freebox en ethernet) |
SIS :| submited by Michael Hoffmann | SIS SiS900 10/100 Ethernet |
|---|
| have been tested on the version 3.1 : works perfectly |
| no problem |
SMC :| submited by GratteurDeBlueSteel | SMC 1255TX |
|---|
| have been tested on the version 3.2 : works perfectly |
| Aucun probleme, internet par lan OK, en 100MB/s |
| submited by SHA | SMC SMC2632W |
|---|
| have been tested on the version 3.3 : works perfectly |
| Marche bien avec SMC Router SMC7004AWBR |
| submited by nickos | SMC SMC1255 |
|---|
| have been tested on the version 3.3 : works perfectly |
| nothing to do!!!!
already detected (admtek chipset) |
| submited by nickos | SMC SMC1211 |
|---|
| have been tested on the version 3.3 : works perfectly |
| nothing to say
RTL8139 chipset |
| submited by nickos | SMC SMC1208 |
|---|
| have been tested on the version 3.3 : works perfectly |
| nothing to say
RTL8029 chipset |
TRUST :| submited by fxjtarga | TRUST ap115w wireless |
|---|
| have been tested on the version 3.2 : works perfectly |
| franchement n ayans jamais trouver de driver linux pour cete carte résaux sans fils, j en suis francher tomber sur le cul :) |
US ROBOTICS :| submited by BatBat | US ROBOTICS carte wifi USR5410 + routeur 8054 |
|---|
| have been tested on the version 3.8.1-FR : works perfectly |
| Fonctionne impec avec ndiswrapper fourni. Juste la config par iwconfig qui semble ne pas s'enregistrer... à voir |
VIA :| submited by the_CName | VIA Rhine III Ethernet VT 6105 L |
|---|
| have been tested on the version 3.2 : works perfectly |
| * |
XIRCOM :| submited by Marc Durand | XIRCOM Realport cardbus ethernet 10/100 réf:RBEM56G-100 |
|---|
| have been tested on the version 3.1 : works perfectly |
| modem 56K non testé |
