monitors

68 elements in this category
Add an NEW hardware
Return to categories list

ACER :

submited by Nephthys	ACER 54eL
have been tested on the version 3.1 : works perfectly
fonctionne impeccablement; fréquences détectées .... rien a redire

submited by Taz	ACER v771
have been tested on the version 3.2 : works perfectly
Fonctionne parfaitement.Bonne couleur.

submited by Stephen	ACER AcerVeiw 54e
have been tested on the version 3.2 : works perfectly
Works great

submited by Paulop	ACER 77e
have been tested on the version 3.3 : works perfectly
L'écran est reconnu après paramétrage dans kcontrol. Les frequences sont les bonnes.

ADI :

submited by sebsauvage	ADI Microscan 5V
have been tested on the version 3.2 : works perfectly
Nécessite de limiter la résolution à 1024x768 (screen=1024x768) au démarrage.

AOC :

submited by themadmax	AOC 7vlr(a)
have been tested on the version 3.1 : works perfectly
pas de problemes

COMPAQ :

submited by NeoZiX	COMPAQ MV740
have been tested on the version 3.1 : works perfectly
Fonctionne sans problème

submited by Djram82	COMPAQ MV700
have been tested on the version 3.1 : works perfectly
Tout marche niquel :))

submited by Aimad	COMPAQ 140 Color
have been tested on the version 3.3 & 3.4 : works mostly
Fonctionne en majeur parti mais j'aurrais très bien pu mettre totalement car seul l'affichage en 1024x768 est tres limité; puisque meme le 32 bits n'a aucun problèmes. (Normal pour un 14")! :p

DELL :

submited by cosmicflo	DELL ES 17
have been tested on the version 3.1 : works perfectly
parfait

EIZO :

submited by cosmicflo	EIZO Flexscan F-77S
have been tested on the version 3.1 : works perfectly
ok

submited by kogaratsu	EIZO flexscan l465
have been tested on the version 3.2 : works perfectly
impeccable

HERCULES :

submited by Michel Bouissou	HERCULES ProphetView 720 15" LCD Flat panel
have been tested on the version 3.2-MiB-10 : works perfectly
Parfait

submited by Tom.	HERCULES ProphetView 920 DVI
have been tested on the version 3.1 et 3.2 : works perfectly
Pas besoin d'installer ou configurer quoi que ce soit. Pour exploiter la résolution maximale, mettre en paramètre de boot : screen=1280x1024. Fonctionne aussi dans les résolutions inférieures.

HIGHSCREEN :

submited by daxko	HIGHSCREEN MS 1779P
have been tested on the version 3.2 -2003-03-30 : works perfectly
-

HP :

submited by Guillaume	HP D2825 (Ultra VGA 1024)
have been tested on the version 3.1-2003.01.01 : need a manipulation by the user
Ecran détecté, mais a priori avec de mauvais paramètres, et il ne passe pas en 1024x768, résolution choisie automatiquement. Utiliser screen=800x600 au boot et ça marche.

submited by Max	HP pavilion mx70
have been tested on the version 3.2 : works perfectly
Fonctionne sans problème.

HUNDAY :

submited by khamlon	HUNDAY Q910
have been tested on the version 3.3 : works perfectly
Marche très bien, testé en 1600*1200

HYUNDAI :

submited by vlim	HYUNDAI Deluxscan V770
have been tested on the version 3.1 : works perfectly
peut tourner en 1280x1024 (pensez à faire screen=1280x1024 au boot)

submited by Omikron	HYUNDAI V770
have been tested on the version 3.2 : works perfectly
rien a dir cé térible

submited by Sibelius	HYUNDAI ImageQuest QV770
have been tested on the version Knoppix V3.3-2003-11-03 : works perfectly
CA MARCHE SANS AUCUN PROBLEME

submited by Whisky51	HYUNDAI DeluxScan 21
have been tested on the version 3.2 - 3.2 MIB - 3.3 : works perfectly
Fonctionne en 1024x768, aucun problème rencontré.

submited by yves	HYUNDAI L70s+
have been tested on the version 3.4 : works perfectly
c'est un lcd 17". Par féfaut la knoppix démarre en 1024x768. C'est correcte, mais si on utilise les cheatcodes pour la faire démarer en 1280x1024 (résolution native de l'écran) c'est plus joli.

submited by Gabriel Bachelot	HYUNDAI ImageQuest Q770
have been tested on the version 3.6 : works perfectly
impecable pour toutes les résolutions de l'ecran

IBM :

submited by Viorel Anghel	IBM IBM G54
have been tested on the version 2002-12-07 : works perfectly
detected

submited by Viorel Anghel	IBM IBM P96
have been tested on the version 2002-12-07 : works perfectly
detected.

submited by titain	IBM e74
have been tested on the version v3.1-2003-01-20 : works perfectly
aucun pb

IIYAMA :

submited by cosmicflo	IIYAMA Vision Master Pro 411
have been tested on the version 3.1 : works perfectly
fonctionne parfaitement

submited by NSPIRIT	IIYAMA HM903DT
have been tested on the version 3.1 : works perfectly
Je n'ai jamais réussi à obtenir du 1920x1440 de façon potable, aussi bien sous windows que sous linux. Cependant, ce moniteur est reconnu maintenant par la plupart des distributions.

submited by LFO	IIYAMA AS4314UT
have been tested on the version 3.1 : need a manipulation by the user
Necessite de booter en mode expert et de régler les frequences du moniteur manuellement (H 24-80 et V 56-75). Ca ne prend pas longtemps et apres, tout marche.

submited by albireo	IIYAMA vision master 1451
have been tested on the version 3.1 : works perfectly
fonctionne parfaitement

submited by noitbacarts	IIYAMA HA202DT (Vision Master Pro 512)
have been tested on the version 3.1 : works perfectly
Aucun pb

submited by the_CName	IIYAMA BX13814UT
have been tested on the version 3.1 : works perfectly
en 1024*768, no soucis !

submited by Nicolas Robaux	IIYAMA S900MT1
have been tested on the version 3.2 : works perfectly
Marche très bien

submited by the_CName	IIYAMA AX3816U
have been tested on the version 3.2 : works perfectly
-

submited by kapi	IIYAMA MA901U Vision Master Pro 452
have been tested on the version 3.3 : works perfectly
Marche trés bien en éditant XF86Config-4 Section "Monitor" Identifier "monitor1" VendorName "Iiyama" ModelName "Iiyama MA901U, VisionMaster Pro 452" HorizSync 30.0-96.0 VertRefresh 50.0-180.0

submited by wallow	IIYAMA pro400
have been tested on the version v3.7 : need a manipulation by the user
Nécessite un kxconfig et une sélection manuelle

LG :

submited by lithium	LG 99G
have been tested on the version 3.1 : works perfectly
Rien a dire, tout cela se fait sans interventions

submited by Saroumane	LG Flatron 78FT plus
have been tested on the version 3.2 : works mostly
Le moniteur fonctionne parfaitement seul le hub USB integré ne fonctionne pas ne me permettant pas d'utiliser ma souris Intellimouse optique

submited by fab	LG L1715S
have been tested on the version MiB10 : works perfectly
works nicely (nothing special) by default it was in 1024x786. I had to change freqs to have 1280x1024.

submited by Trajan	LG Flatron 1720P
have been tested on the version 3.2 et 3.3 : works perfectly
Aucun soucis, le hub intégré fonctionne aussi parfaitement.

submited by Fred	LG Flatron L1510S (LCD)
have been tested on the version 3.3 2003-09-24 : works perfectly
Fonctionne parfaitement résolution reconnue en 1024*768

submited by Noone	LG 795FT
have been tested on the version 3.4 : works perfectly
Parfait

LITEON :

submited by [extatic]	LITEON LitePanel150 (GC150AT/ATA)
have been tested on the version 3.2 : works perfectly
Aucun problÚme!

MITSUBISHI :

submited by Yun.SF3	MITSUBISHI Diamond Pro 730
have been tested on the version 3.1 : works perfectly
RAS

submited by picodor	MITSUBISHI Diamond plus 71
have been tested on the version 3.1 : works perfectly
Au poil!

submited by klakos	MITSUBISHI Diamond Pro 710
have been tested on the version 3.2 : works perfectly
Fonctionne parfaitement !

NEC :

submited by PPP	NEC MultiSyncLCD1550v
have been tested on the version 3.1-2003-01-01-DE : works perfectly
super cool ça marche avec mon écran LCD VIVE KNOPPIX

submited by jmj	NEC c900
have been tested on the version 3.2 mib : works perfectly
no comment

OTHER :

submited by Arnaud	OTHER Belinea 10.30.20
have been tested on the version 3.2 : works perfectly
aucun problème de reconnaissance

submited by miorx	OTHER Belinea LCD17" (101715)
have been tested on the version 3.3 : works perfectly
Recconu direct en 1280x1024 RAS

submited by ReNo	OTHER proview PS 776
have been tested on the version 3.2 : works perfectly
ecran 17" TFT

submited by KLAOUN	OTHER MOVITA 15"
have been tested on the version 3.3-2003-11-19 : works perfectly
pas de probleme

submited by Simon	OTHER Moniteurs TTX
have been tested on the version 3.3 : works perfectly
Les moniteurs TTX fonctionnent parfaitement...

PACKARD BELL :

submited by NIKHKKO	PACKARD BELL 1412SME
have been tested on the version 3.3 : need a manipulation by the user
Forcer hsync=60 vsync=60

submited by Tournois Dévid	PACKARD BELL pnp5480
have been tested on the version 3.4 : works perfectly
Marche super bien, aucunne manipulation nécéssaire

PHILIPS :

submited by talstog	PHILIPS 107S
have been tested on the version 3.1 : works perfectly
fine

submited by Stéphane	PHILIPS 150 S3
have been tested on the version 3.2 : works perfectly
J'ai du mettre Knoppix xvrefresh=59 pour que cela marche.

submited by Stéphane	PHILIPS 150 S3
have been tested on the version 3.3 : works perfectly
J'ai du mettre Knoppix xvrefresh=60. xvrefresh=59 n'affiche Knoppix que sur 2/3 de l'écran !!

submited by Thomas	PHILIPS 107E5
have been tested on the version 3.2 : works perfectly
du premier coup !

submited by Thomas	PHILIPS 150C
have been tested on the version 3.2 : don't works actually
quand le system demarre (apres le choix des options) l'ecran se desactive et affiche: choissez 1024x768@60Hhz

RELISYS :

submited by Adrien B	RELISYS 15"0.28
have been tested on the version 3.1 : works perfectly
pas de problemes

SAMSUNG :

submited by gjai	SAMSUNG sm151s
have been tested on the version 3.1 : works perfectly
rien a redire

SONY :

submited by Bouddha	SONY Multiscan 200ES
have been tested on the version 3.1 : works perfectly
Rien à redire

submited by jean-Pierre	SONY Hmd 330
have been tested on the version 3.1 : works perfectly
Aucun problème

submited by tortouse	SONY GDM-20E20
have been tested on the version 3.1 : works perfectly
écran 20" issu de Sun (matos sony inside) avec adaptateur PC//Sun parfaitement reconnu au démarrage !! C'est la première fois qu'un OS le fait!?!

submited by Anthony	SONY SONY Multiscan 200GS
have been tested on the version 3.1 : works perfectly
Impeccable !

TRUST :

submited by klakos	TRUST Precision Viewer 17''
have been tested on the version 3.2 : works perfectly
Rien à dire Fonctionne parfaitement !

Récupérez

Knoppix CD
V5.1.1-2007-01-04
=> changelog
=> téléchargement
=> commander un CD

Knoppix DVD
V5.3.1-2008-03-26
=> changelog
=> téléchargement
=> commander un DVD

Evinux
200701_maj1 (2007-10-13)
=> changelog
=> téléchargement
=> commander un CD

Affiliation